If you’re planning a facade project, the first question is usually simple: what do Upvc fins cost? In India, Upvc fins are typically priced per running foot, and for supply the rate generally falls in the range of ₹30–₹75 per running foot [verify], depending on the profile size, colour, and order quantity. Add installation and turnkey execution, and the delivered cost rises accordingly.
Below is a full breakdown of what drives the price, how supply-only compares to installed cost, and how to estimate your own project — so you can budget accurately before you request a quote.
Quick answer: Upvc fins price ranges in India (2026)
| Pricing option | Typical range (per running foot) |
|---|---|
| Supply only (standard profile, white) | ₹30 – ₹75 |
| Supply + installation | Higher; varies by site & height |
| Custom colours / wood finishes | Premium over standard |
| Large-profile / complex sections | Priced on measurement |
Prices vary by profile size, colour, finish, quantity, and site conditions. For an exact figure, request a project-specific quote.
Prices vary by profile size, colour, finish, quantity, and site conditions. For an exact figure, request a project-specific quote.
What affects Upvc fins pricing?
Several factors move the per-running-foot rate up or down. Understanding them helps you compare quotes fairly.
1. Profile size and section
Larger and deeper fin profiles use more material, so a 100mm+ section costs more per foot than a slim 25–50mm fin. The profile you choose is usually the biggest single driver of price.
2. Colour and finish
Standard white is the most economical. Custom colours, matte finishes, and wood-textured looks add to the rate because of the material and finishing involved.
3. Order quantity
Larger orders typically bring the per-foot rate down. A high-rise facade with thousands of running feet will usually secure a better rate than a small residential job.
4. Supply-only vs. installation
Buying fins for your own contractor to fit costs less than a turnkey supply-and-install package — but installation adds real value in alignment, bracket fixing, and finish quality.
5. Site conditions
Building height, access, scaffolding needs, and elevation complexity all influence the installation portion of the cost.
Supply-only vs. supply + installation
Supply-only means you buy the manufactured fins and arrange fitting yourself. This is the lowest headline price, but you take on measurement, fixing, and finish responsibility.
Supply + installation (turnkey) covers design coordination, manufacturing, delivery, and professional on-site fitting. The per-foot cost is higher, but you get correct alignment, secure bracket fixing, and a finished facade with single-point accountability. For most facade projects, turnkey is the safer choice.
Standard sizes and how they affect price
Upvc fins come in a range of profiles — commonly from around 25mm up to 100mm and beyond. As a rule:
- Smaller profiles (25–50mm): lowest per-foot cost; good for subtle shading and detailing.
- Medium profiles (50–75mm): balanced cost and visual presence.
- Large profiles (100mm+): highest per-foot cost; strong architectural statement and deeper shading.
Choosing the right size is a design-and-budget decision — a manufacturer can help you match the profile to your elevation and cost target.
Why buying direct from a manufacturer is cheaper
When you buy through a dealer or middleman, a margin is added on top of the manufacturing cost. Buying direct from the manufacturer removes that layer, so you get a better per-running-foot rate — and faster coordination on custom sizes, colours, and lead times. In-house manufacturing also means tighter quality control and more reliable delivery schedules.
How to estimate your project cost
You can get a rough budget in three steps using the running-foot method:
- Measure the total running feet of fins across your elevation (length of each fin run × number of runs).
- Choose your profile and colour, then apply an estimated per-foot rate from the ranges above.
- Add installation if you want turnkey execution.
Example (illustrative only): 2,000 running feet × ₹50/ft = ₹1,00,000 for supply, before installation. Use this only as a ballpark — a site-specific quote will be exact.
How to get an accurate quote
The fastest way to a firm price is to share your project details — elevation drawings or approximate running feet, preferred profile, colour, and location. A manufacturer can then return an exact per-running-foot rate and a turnkey estimate.
Frequently asked questions
What is the price of Upvc fins per running foot in India?
Supply rates commonly fall in the ₹30–₹75 per running foot range [verify], depending on profile size, colour, and quantity. Installed and custom-finish prices are higher.
Are Upvc fins cheaper than aluminium fins?
Generally yes. Upvc fins usually cost less on both supply and lifetime basis, since they need no painting or polishing over the years.
Does profile size change the price?
Yes. Larger, deeper profiles use more material and cost more per foot than slim profiles.
How can I reduce the cost of a Upvc fins project?
Buy direct from a manufacturer, choose a standard colour where possible, and order in larger quantities to bring the per-foot rate down.
Is installation included in the price?
Not in supply-only pricing. Turnkey supply-and-install is quoted separately and depends on site height and complexity.
Want an exact price for your project? Elite Fins manufactures Upvc fins in-house at our Mira Road, Maharashtra facility and installs across Mumbai, Vasai, Pune, and Pan India — with 500+ colour options and custom profiles. Get a free quote at elitefins.com/contact-us or call +91 8450965094 and +91 9930724665